Choosing a Suitable LED Driver for Your LED Strip Lights

Today we are noting another of your FAQs, this time identifying with the subject of LED Drivers.

As LED Strip Lights have voltage and flow necessities which are distinctive to the mains power supply (240V AC), they need a different unit called a LED Driver to work.

What is a LED Driver?

A LED Driver, once in a while alluded to as a transformer or force supply, is an independent force supply that coordinates with its yield to the voltage and momentum prerequisites of the gadget it serves. Chipping away at a comparative premise to the 12V transformers in MR16 spotlight frameworks, the LED Driver takes the mains power supply and changes it to 12V DC.

Which LED Driver do I require?

Drivers come in numerous shapes and estimates, and not all will be appropriate for your motivations. While picking a driver you ought to think about the accompanying:

– The electrical plug you are utilizing;

– The size of your LED Strip Lights.

Driven Drivers come in two principle assortments; “attachment and play” and mains prepared.

As the name recommends, “fitting and play” drivers led supply are intended for speedy and simple establishment, and require negligible skill to utilize. The driver associates with the mains supply by means of a standard UK 3-pin plug and to the strip lights through relating male and female connectors.

Mains prepared drivers are intended for further developed establishments and can be designed straightforwardly into your family mains, generally by means of a homegrown family switch for a completely coordinated lighting experience. An IP67 ratingalso makes them reasonable for use in wet and sodden conditions.

Just as the sort, you will likewise need to pick a reasonably estimated driver. The size of the driver is estimated in watts and should be coordinated to the force utilization, or “burden,” of your LED Strip Lights.

To figure the heap of your strip lights, increase the wattage per meter by the absolute number of meters you mean to run off a solitary driver. This can be communicated as follows:

wattage per meter x number of meters = all out power utilization (load)

For example, on the off chance that you are utilizing 10 meters of LED Strip Light that burns-through 7.2 watts per meter, the whole burden will be 10 x 7.2 = 72 watts. In this specific model a 100 watt driver will be adequate.

Keep in mind, it is feasible to run more than one strip light off a solitary driver. Continuously counsel an expert circuit tester prior to endeavoring any mains electrical work.

Leave a comment

Your email address will not be published. Required fields are marked *